 |
A
Tanguay 430 is utilized to assist in the offloading of both tree length
and cut to length logs as they are delivered to the sawmill site.
This machine assists an overhead crane that offloads the majority
of trucks, but cannot be adjusted quickly to the changing load sizes
that arrive on an hourly basis. The Tanguay is flexible and able
to handle 8-foot and tree length logs without switching attachments. |
 |
A
CAT IT62 loader is utilized for a variety of functions. The
machine is equipped with a grapple to assist in the loading of
cut-to-length (8-foot)
logs to the deck for feed to the sawmill. The machine can quick
couple to a 4-ton bucket for use in chip loading, snow removal, salt
spreading and
sawdust loading. A set of short forks are also available for
backup in the lumber yard for moving bundles of finished product. |
 |
There
are four (4) CAT 950 forklifts in operation. Three machines are
equipped with 98" forks for moving bundles from the sawmill to the kiln
and then to the planer. |
 |
The
second and third long fork machines are utilized in the same rotation
of feeding the sawmill, loading and unloading the kilns, and feeding
the
planer. |
 |
There
are two machines, a CAT 950 and a CAT IT28, with short forks that are
used for removing the
finished bundles from the mill and positioning them in the yard by size
and grade. These machines are then utilized to load both
trucks and rail for shipping to the customer. |